This section provides tips (when available) for the
most common repair procedures for the Sun Fire T1000. The repair
procedures are provided in the following manual:
| Component |
Tips |
| Disks |
-
Disk Cable Missing From Sun Fire T1000 Diskless configurations (T10-106A-02GA0P)
with a serial number below 0610NNE0JZ.
(FAB 1000032.1).
-
Certain Seagate disk drives may experience servo seek errors.
(FAB 1022189.1).
|
| Ethernet |
-
Northstar Dual GBE -02 cards do not support Solaris netboot on SPARC systems.
(FAB 1000141.1).
|
| Miscellaneous |
-
Console behavior is inconsistent when a graphics device and keyboard are specified for console use. This occurs when the OpenBoot variables 'input-device' and 'output-device' are set to anything other than the default value of 'virtual-console'.
(FAB 1018990.1).
|
| PCI |
-
FCO A0279-1: Sun Fire T1000 with a Rhea HBA installed may experience Data Loss, Data Corruption and System Hangs.
(FAB 1000783.1).
|
| Power Supply |
-
A small number of Sun Fire T1000 and SPARC Enterprise T1000 systems may experience a 3.3V Standby low
voltage warning and/or soft shutdown.
(FAB 1019858.1).
|
