Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Sun Blade 100 Workstation : Archived FINs and FCOs

Implementation (Impl.):
M = Mandatory (Fully Pro-Active)

C = Controlled Pro-Active (per Sun Geo Plan)

U = Upon Failure
R = Reactive (As Required)

FAB Implementation Synopsis Last Modified Date
A0205-1 U Idle Sun Blade 100 systems may experience unscheduled reboots. Dec 23 2002
A0204-1 U SunBlade 100 systems may not auto-restart after a power failure. Sep 30 2002
A0202-1 U Mirrored 20GB disk drives on Ultra 10 and Sun Blade 100 systems may be exposed to a drive compatibility issue when replacing a failed drive. Mar 06 2003
A0189-1 U Ultra 60/80 and SunBlade 100/1000 systems with Expert3D-Lite cards and certain 21-inch monitors will have to either add or replace the monitor adaptor. Feb 22 2002
A0186-1 U SunPCi II and SunPCi IIpro cards may not respond after rapid/successive power cycling. Dec 03 2001
A0178-1 U Audio Noise from Sunblade 100 system speakers. Aug 27 2001
I0872-1 R New 20.1GB disk drive is being released in a limited number of Sun Blade 100 systems. 2002-11-26
I0843-1 R New Motherboard FRU for Sun Blade 100 systems requires modified installation procedure 2002-06-25
I0787-1 R Installation of a Seagate ST320011A HDD into the drive tray of a Sun Blade 100 will unseat the hard drive tray latch cover 2002-03-14
I0739-1 R The SunPCi II board may not seat properly in the Sun Blade 100 chassis 2001-12-06
I0702-1 R SunForum 3.X is not supported 8-bit graphic mode on Sun Blade100 or Sun Blade 1000 2001-07-27
I0699-1 R Sun Blade 100 system motherboard p/n since Jun/13/01 2001-08-03
I0632-1 R IEEE 1394 Camera Cable 2000-12-18
  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback