Sun Fire[tm] V210 / V240, RoHS:YL Server: Repair Procedures

This section provides the most common repair procedures for the Sun Fire V210 and V240, which are included in the following manual:

Sun Fire V210 and V240 Servers Parts Replacement Manual (817-0743)

The following table provides the page numbers for each procedure.

Component	Tips
DVD-ROM Drive (documented in 816-4826)	On V2x0 Systems, The DVD Drive May Not Open After Being Replaced (FAB 1000005.1).
Fan	Identifying an older system that requires an X-Option FAN Upgrade Kit (X7418A) when adding 1GB memory DIMMs on Sun Fire V210 systems (FIN I1117-1).
Memory	Minimum OBP version is required to support new DIMMs with 333MHz dual data rate. (FIN I1148-1). Systems will fail to pass self-test if the OBP version is below the required minimum level to support the JEDEC SPD 1.0 formatted DIMMs (FIN I1092-1).
PCI Riser Card (V240)	A short circuit on the V240 PCI Riser Card connector following reconfiguration or reassembly may cause charring of the Motherboard or system power-down (FIN I1075-1).
Rack	Sun 72" Delorean rack kit for the Sun Fire V210/V240 is missing mounting screws (FIN I1142-1).
System Board	Incorrect handling of V2x0 systems boards can cause premature or intermittent failure. (FAB 1000363.1). A short circuit on the V240 PCI Riser Card connector following reconfiguration or reassembly may cause charring of the Motherboard or system power-down (FIN I1075-1). How to identify System Board FRUID change after CPU upgrade to Sun Fire V210/V240 and Netra 240 systems (FIN I1064-1). Sun Fire V210/V240 server onboard ethernet ports may silently corrupt received network packets (FCO A0214-1).