FAB
|
Implementation
|
Synopsis
|
Last Modified Date
|
A0208-3 |
U
|
440MHz and 450MHz UltraSPARC II Modules in Ultra 60/80, Enterprise 220R/420R and Netra t platforms may experience Red State Exception, Send Mondo Timeout and hard hangs |
Mar 29 2004
|
A0200-1 |
M
|
SunBlade 1000/2000 and Ultra 60/80 systems may exhibit a blank screen upon boot up with an XVR-1000 Graphics Accelerator installed. |
Jul 10 2002
|
A0189-1 |
U
|
Ultra 60/80 and SunBlade 100/1000 systems with Expert3D-Lite cards and certain 21-inch monitors will have to either add or replace the monitor adaptor. |
Feb 22 2002
|
A0186-1 |
U
|
SunPCi II and SunPCi IIpro cards may not respond after rapid/successive power cycling. |
Dec 03 2001
|
A0182-2 |
U
|
Systems with 18.2GB and 36GB IBM disk drives may experience higher than expected failure rate. |
Feb 07 2005
|
A0164-1 |
C
|
Systems with FC100/P cards (QL2100 PCI FC-AL HBA) having Molex optical transceivers, may cause increasing numbers of loop errors, excessive LIPs, and SCSI parity errors as they age. |
May 12 2000
|
A0158-1 |
U
|
Ultra 60 systems shipped out of Sun UK may experience crystal reliability issues which results in mutliple failure types. |
Dec 17 1999
|
A0153-1 |
U
|
SCSI transport soft retry errors on Ultra 60 systems running external Ultra SCSI I/O devices. |
Aug 24 1999
|
A0149-1 |
M
|
Ultra 60 systems with 501-4450-11 motherboard, or -10 motherboard with Deviation sticker WO_14997, and 1GB of memory installed have a high probability of experiencing undetectable data corruption. |
May 07 1999
|
A0146-1 |
U
|
Ultra 10, Ultra 30 or Ultra 60 with FFB2+ installed may experience right shift of horizontal lines. |
May 25 1999
|
A0142-1 |
U
|
Ultra 60 system hang when attempting to update flashPROM. |
Mar 22 1999
|
A0139-1 |
U
|
Any Ultra PCI-based system with the PGX Graphics PCI Frame Buffer installed may display a vertical black stripe while running in the OpenWindows environment. |
Nov 25 1998
|
I0618-1 |
R
|
A screen resolution of 1024x768x75 for Creator (FFB) and Elite (AFB) Frame Buffers with any monitors is set incorrectly by the Open Boot PROM. |
2000-10-20
|
I0608-1 |
C
|
Mis-wiring of the fan power supply to the X-option No Noise Kit, on the recent shipment of Ultra 60's, may cause overheating and potential rapid shutdown. |
2000-09-15
|
I0570-3 |
R
|
Provide instructions and guidelines to CORRECTLY identify Ecache panic fault diagnosis. |
2000-07-07
|
I0538-1 |
R
|
New X-option available to reduce acoustic noise of Ultra 30 and Ultra 60 workstations. |
1999-12-14
|
I0444-1 |
R
|
Creator Series 3 FFB2+ Cards may fail the SunVTS 2.1.2 ffbtest. |
2004-01-07
|
I0416-1 |
R
|
Ultra 5/10/30/60 2.5.1/2.6 AutoClients or Diskless Clients May Not Boot or Run a Window System After Installation. |
2004-01-07
|